型号 Type | HX-1000TM/LCD | HXD-1000TM/LCD |
物镜/压头切换Lens/Indenter switch | 自动完成物镜与压头转塔过程With Motorized Turret | |
转塔定位误差Position accuracy | 2μm以内Not greater than 2μm | |
试验力Test force | 0.0981,0.2452,0.4903,0.9807,1.961,2.942,4.903,9.807 ( N)10, 25, 50, 100, 200, 300, 500, 1000 (gf) | |
加荷方式Loading mode | 程控自动加荷,保荷和卸荷Program-controlled application, duration and removal of load | |
保荷时间Duration time | 5–60 sec selectable 步长 (In step of ) 5 sec. | |
硬度测量范围Measuring range | 5 HV – 3000 HV以上above硬度示值误差Indication error≤3% | |
总放大倍率Total Magnification | 物镜 Objective: 40x; 10x(观察用 For observation),测量目镜 Eyepiece: 15x (可选配Optional :10X)总倍率 Total: 600x; 150x (观察用 For observation) | |
最小计数单位 | 0.01μm | |
最小检测单位Min. detection | 0.025μm |
X-Y测试台X-Y stage | 尺寸 Dimensions:100×100mm 最大移动 Travel range:25×25 mm最小读数Resolution:1/100mm | |
光路切换Optical path | 双光通道(测量/摄影切换)Measurement / Photo switch |
测量读数方式Measuring mode | 用测微目镜取得对角线长度,输入,即在LCD显示硬度值,可打印输出. After taking D1(D2) with the eyepiece and entering them, the hardness value is displayed on LCD. The data can be printed out. | 目镜测量数字显示, 数字显示试验力,保荷时间, 硬度值, 最大最小值, 平均值, 不均匀度, 标准偏差, 洛氏HRC HRA转换值等。内置打印机提供测试报告. With eyepiece digital display, Display on LCD: Load, Duration time, Diagonal lengths, Hardness values, Min, Max, Average, Divergence,, Standard deviations, converted HRC HRA values, and etc. A test result is provided with the built-in printer. |
数据输出Data output | RS-232接口RS-232 interface | |
试件最大高度Max..test height | 85mm/90mm | |
执行标准(或参照)Standards concerned | 中国国家标准 GB/T 4340国际标准ISO 6507,美国标准ASTM E384,日本标准 JIS B7734 | |
标准配件,附件Standard attachments | 15X测量目镜、物镜40x,10x, 维氏压头(在机上)、X-Y工作台、标准硬度块(700HV1 400HV0.2)、 薄片夹紧器、小圆柱体夹紧器、平口钳、水平仪、冷光源灯泡、电源线、保险丝、辅助工具、使用说明书、打印机(内置) | |
选购件Options | 可增3个物镜The third objective数码相机及适配镜 Digital camera & adaptor金相镶嵌夹具 Clamp for metallographic specimen | |
电源 Power supply | 220 VAC, 50/60 Hz | |
尺寸 Dimensions | 主机尺寸Net:430×260×500mm 外包尺寸Packing size:540 × 500 × 600 mm | |
重量 weight | 主机净重Net :38kg 毛重 Gross:47 kg |